Epson L60IIP - TM B/W Direct Thermal Printer Information Manual page 95

Command Name Function
GS / Print Prints a downloaded
downloaded bit image using a
bit image specified mode.
GS : Start/end Starts or ends a
macro macro definition.
definition
GS < Initialize Feeds a label to the
printer print starting position.
mechanism
GS A Adjust label Sets the label
print starting position relative to
position the default position.
GS B Turn white/ Turns white/black
black reverse reverse printing
printing mode on or off.
mode on/off
GS C 0 Set counter Selects a print mode
print mode for the serial counter.
GS C 1 Select count Selects a count
mode (A) mode for the serial
counter.
GS C 2 Set counter Sets the counter
value.
GS C ; Select count Selects a count
mode (B) mode for the serial
counter and
specifies the counter
value.
GS E Select head Selects the print
control speed and head
method energizing time.
The commands supported by each printer are marked by a
TM-T Series TM-L Series TM-U200
TM-
267II
T60 T80 T80M T85 L60
or a O. The functions of the commands marked by a O may differ, depending on the printer model.
Supported Command
TM-300/300M TM-
270
L60II B D A B C D
TM-U375 TM- TM-U950 TM-
TM-U375M U925 TM-U950M 215S
TM-
295