Send/Exit Button - Samsung ML-85G Operating Instructions Manual

ML-85G IB(SSA) 2/9/99 11:15 AM
6
Page wp2-5
Lines/Page Spin Box
The Lines/Page setting displayed in this Menu becomes the printer default
lines/page.
Lines/Page Spin Box Default Values On Startup
Name
Letter
Legal
Executive
A4
Envelope #10
Envelope DL
Envelope C5
Envelope Monarch
Source Menu
Select a source from the paper source list-Manual Feed or Tray (Paper Cassette).

Send/Exit Button

If the PCL Emulation Front Panel status changes, choosing this button changes the
WPS.INI file for the PCL on the port the PCLEFP is currently pointing to.
If the PCLEFP does not have any status change, this button sends all of the
PCLEFP settings to the PCL interpreter, not just the settings that changed.
Upon pressing this button, the new settings are written to the WPS.INI file. This
way, the PCLEFP and the PCL interpreter will be in sync. This button has two
states and two corresponding names: Exit and Send.
Exit
This will be seen under two conditions:
If the PCLEFP does not have any status change, the Send button appears
when the application is opened. After you press Send, the button changes to Exit.
If the PCLEFP status changes, the current settings are shown and and the Exit
button is active. After you have made a change to the PCLEFP settings, and they
no longer match the PCLEFP settings in the WPS.INI file, the button changes to
Send. After you have pressed the Send button the changes are written to the
WPS.INI file and the button changes back to Exit.
- Windows Printing System-
Portrait
60
78
57
64
51
45
48
39
Landscape
45
45
37
43
18
19
32
17
2-5