Adjusting The Print Density; Print Density - Samsung ML-85G Operating Instructions Manual

ML-85G IB(SSA) 2/9/99 11:15 AM
2
5 – 2
Page 5-2

Adjusting the Print Density

Print Density

The print density can be selected via the OPTIONS menu in the Printer Status window.
Three print densities are available: dark, medium, light. Medium is the factory default.
- Operating Instructions -
Grasp the clear tab on top of
the new Developer Cartridge and
pull firmly to remove the
entire length of clear sealing
tape. Discard the tape, and rock
the Developer Cartridge to
distribute toner material evenly
within the cartridge.
Remove the Plastic Strip from
the Developer Cartridge
With one hand, hold the
Developer Cartridge in the
center (do not grasp the
Developer Cartridge by the
shutter wires), and slide it into
the printer.
Inserting the Developer
Cartridge
Close the Top Cover. If it closes
easily, the Developer Cartridge is
installed correctly.
Close the Top Cover