Chapter 5: Administration Settings; User List (Password Management) - Cisco SPA112 Administration Manual

Administration Settings

User List (Password Management)

Cisco SPA100 Series Phone Adapters Administration Guide
This chapter describes the administrative settings for the ATA. It includes the
following sections:
• User List (Password Management)
• Management
• Logging
• Diagnostics
• Factory Defaults
• Firmware Upgrade
• Configuration Management
• Reboot
Use the Administration > Management > User List page to manage the two user
accounts for the configuration utility. The administrator-level account has the
default username admin and password admin. The user-level account has access
to modify a limited set of features. This account has the default username cisco
and password cisco.
For the IVR, no user password is required; the user simply presses # when
prompted. The default administrator password is 1234#. You can set these
passwords on the Voice > System page. For more information, see
Settings.
To open this page: Click Administration in the menu bar, and then click
Management > User List in the navigation tree.
5
Voice System
113