Cisco SPA112 Administration Manual page 67

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Reg Retry Intvl Cap
Response Status Code Handling
Field
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC
Description
The maximum value to cap the exponential back-
off retry delay (which starts at Register Retry Intvl
and doubles on every REGISTER retry after a
failure) In other words, the retry interval is always at
Register Retry Intvl seconds after a failure. If this
feature is enabled, Reg Retry Random Delay is
added on top of the exponential back-off adjusted
delay value. Default setting: 0, which disables the
exponential backoff feature.
Description
SIP response status code for the appropriate
Special Information Tone (SIT) For example, if you
set the SIT1 RSC to 404, when the user makes a
call and a failure code of 404 is returned, the SIT1
tone is played. Reorder or Busy tone is played by
default for all unsuccessful response status code
for SIT 1 RSC through SIT 4 RSC.
SIP response status code to INVITE on which to
play the SIT2 Tone.
SIP response status code to INVITE on which to
play the SIT3 Tone.
SIP response status code to INVITE on which to
play the SIT4 Tone.
SIP response code that retries a backup server for
the current request.
Interval to wait before the ATA retries registration
after failing during the last registration.
4
67