Cisco SPA112 Administration Manual page 9

Getting Started with the Cisco SPA100 Series Phone Adapters
Product Features
Cisco SPA100 Series Phone Adapters Administration Guide
Back Panel
The following features are found on the back panel of the ATA.
SPA112
SPA122
Feature Description
RESET Using a paperclip or similar object, press this button briefly to
restart the unit. Press and hold for 20 seconds to restore the
factory default settings. All user-changeable non-default
settings will be lost. This may include network and service
provider data.
PHONE 1, Connect to an analog phone, using an RJ-11 phone cable.
PHONE 2
(gray)
ETHERNET Can be used to connect to a device on your network, such as
(yellow) a computer or an Ethernet switch, using an Ethernet cable.
SPA122 Only
INTERNET Connect to a broadband network device (DSL or cable
(blue) modem) or a network router, using an Ethernet cable.
1
9