Diagnostics; Ping Test - Cisco SPA112 Administration Manual

Administration Settings

Diagnostics

Diagnostics
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Syslog Server
The ATA includes two built-in diagnostic tools:
•

Ping Test

• Traceroute Test
Ping Test
Use the Administration > Diagnostics > Ping Test page to test connectivity
between the ATA and a destination.
To open this page: Click Administration in the menu bar, and then click
Diagnostics > Ping Test in the navigation tree.
Enter the IP address or domain name that you want to ping.
Enter a packet size in bytes. The range is 32 to 65500 bytes.
Choose the number of times to send the ping request (5, 10, or Unlimited).
Click Start to Ping to start the test. After the test is complete, the test results
appear on the page. While the ping test is running, you can click Stop to abandon
the test.
The test results indicate the number of packets sent and received, the percentage
of packet loss, and the round-trip speed.
Click Close to close the test results and display the Ping Test form.
Description
Check the box in the heading row to include all services
in the log file that is transmitted to the syslog server.
Alternatively, check the box for kernel or system to
include that service in the log file.
5
126