Cisco SPA112 Administration Manual page 116

Administration Settings
Management
Cisco SPA100 Series Phone Adapters Administration Guide
SPA122: Web Access
If needed, you can enable web access to the configuration utility. This feature
allows you to manage the configuration from a computer on the WAN at your office
and from your home computer via the Internet. To access the configuration utility,
launch a web browser and enter the URL in the Address bar. The URL must include
the specified protocol, the WAN IP address of the ATA, and port number. For
example, with the HTTPS protocol, a WAN IP address of 203.0. 1 13.50, and port of
80, you would enter: https://203.0. 1 13.50:80
Field
Web Utility Access
SPA122: Remote Access
Field
Remote
Management
Description
This field is used to control access to the configuration
utility from devices that are connected to the SPA122
Ethernet (LAN) port. Select the protocol to use for
access to the configuration utility. Choose HTTP and/or
HTTPS. For secure Internet access, select HTTPS. The
default value is HTTP.
Description
Allows access to the configuration utility from a device
that is on the WAN side of the ATA. For example, you
could connect from another subnet in your office or from
your home computer.
Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Disabled. The other
fields in this section of the page are available only if you
enable this feature.
If you attempt to enable this feature while using the
default administrator login credentials, you will be
prompted to change the credentials. Click OK to
acknowledge the warning message. Use the
Administration > Management > User List page to
change administrator password. For more information,
see User List (Password Management), page
5
113.
116