Cisco SPA112 Administration Manual page 55

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Call 1 and 2 State
Call 1 and 2 Tone
Call 1 and 2 Encoder
Call 1 and 2 Decoder
Call 1 and 2 FAX
Call 1 and 2 Type
Call 1 and 2 Remote Hold
Call 1 and 2 Callback
Call 1 and 2 Peer Name
Description
Can take one of the following values:
• Idle
• Collecting PSTN Pin
• Invalid PSTN PIN
• PSTN Caller Accepted
• Connected to PSTN
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Status of the fax pass-through mode.
Direction of the call. May take one of the following
values:
• PSTN Gateway Call = VoIP-To-PSTN Call
• VoIP Gateway Call = PSTN-To-VoIP Call
• PSTN To Line 1 = PSTN call ring through
and answered by Line 1
• Line 1 Forward to PSTN Gateway = VoIP
calls Line 1 then forwarded to PSTN GW
• Line 1 Forward to PSTN Number =VoIP
calls Line 1 then forwarded to PSTN
number
• Line 1 To PSTN Gateway
• Line 1 Fallback To PSTN Gateway
Indicates whether the far end has placed the call
on hold.
Indicates whether the call was triggered by a call
back request.
Name of the peer phone.
4
55