Cisco SPA112 Administration Manual page 99

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Supplementary Service Subscription
The ATA provides native support of a large set of enhanced or supplementary
services. All of these services are optional. The parameters listed in the following
table are used to enable or disable a specific supplementary service. A
supplementary service should be disabled if a) the user has not subscribed for it,
or b) the Service Provider intends to support similar service using other means
than relying on the ATA.
Field
Call Waiting Serv
Block CID Serv
Block ANC Serv
Dist Ring Serv
Cfwd All Serv
Cfwd Busy Serv
Cfwd No Ans Serv
Cfwd Sel Serv
Cfwd Last Serv
Block Last Serv
Accept Last Serv
DND Serv
CID–Serv
Description
Enable Call Waiting Service. Default setting: Yes
Enable Block Caller ID Service. Default setting:
Yes
Enable Block Anonymous Calls Service Default
setting: Yes
Enable Distinctive Ringing Service Default
setting: Yes
Enable Call Forward All Service Default setting:
Yes
Enable Call Forward Busy Service Default
setting: Yes
Enable Call Forward No Answer Service Default
setting: Yes
Enable Call Forward Selective Service Default
setting: Yes
Enable Forward Last Call Service Default setting:
Yes
Enable Block Last Call Service Default setting:
Yes
Enable Accept Last Call Service Default setting:
Yes
Enable Do Not Disturb Service Default setting:
Yes
Enable Caller ID Service Default setting: Yes
4
99