Cisco SPA112 Administration Manual page 83

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Cfwd No Ans Act
Code
Cfwd No Ans Deact
Code
Cfwd Last Act Code
Cfwd Last Deact
Code
Block Last Act Code
Block Last Deact
Code
Accept Last Act
Code
Accept Last Deact
Code
CW Act Code
CW Deact Code
CW Per Call Act
Code
CW Per Call Deact
Code
Block CID Act Code
Block CID Deact
Code
Block CID Per Call
Act Code
Block CID Per Call
Deact Code
Description
Forwards no-answer calls to the extension specified
after the activation code. Default setting: *92.
Cancels call forwarding of no-answer calls. Default
setting: *93.
Forwards the last inbound or outbound calls to the
extension specified after the activation code. Default
setting: *63.
Cancels call forwarding of the last inbound or outbound
calls. Default setting: *83.
Blocks the last inbound call. Default setting: *60.
Cancels blocking of the last inbound call. Default setting:
*80.
Accepts the last outbound call. It lets the call ring
through when do not disturb or call forwarding of all
calls are enabled. Default setting: *64.
Cancels the code to accept the last outbound call.
Default setting: *84.
Enables call waiting on all calls. Default setting: *56.
Disables call waiting on all calls. Default setting: *57.
Enables call waiting for the next call. Default setting: *71.
Disables call waiting for the next call. Default setting:
*70.
Blocks caller ID on all outbound calls. Default setting:
*67.
Removes caller ID blocking on all outbound calls. Default
setting: *68.
Blocks caller ID on the next outbound call. Default
setting: *81.
Removes caller ID blocking on the next inbound call.
Default setting: *82.
4
83