Cisco SPA112 Administration Manual page 85

Spa100 series phone adapters
Hide thumbs Also See for SPA112:
Table of Contents

Advertisement

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Attn-Xfer Act Code
Modem Line Toggle
Code
FAX Line Toggle
Code
Media Loopback
Code
Referral Services
Codes
Description
If the code is specified, the user must enter it before
dialing the third party for a call transfer. Enter the code
for a call transfer.
Toggles the line to a modem. Default setting: *99.
Modem pass-through mode can be triggered only by
pre-dialing this code.
Toggles the line to a fax machine. Default setting: #99.
Use for media loopback. Default setting: *03.
These codes tell the ATA what to do when the user
places the current call on hold and is listening to the
second dial tone.
One or more *code can be configured into this
parameter, such as *98, or *97|*98|*123, etc. The
maximum length is 79 characters. This parameter
applies when the user places the current call on hold (by
Hook Flash) and is listening to second dial tone. Each
*code (and the following valid target number according
to current dial plan) entered on the second dial-tone
triggers the ATA to perform a blind transfer to a target
number that is prepended by the service *code.
For example, after the user dials *98, the ATA plays a
special dial tone called the Prompt Tone while waiting
for the user the enter a target number (which is checked
according to dial plan as in normal dialing) When a
complete number is entered, the ATA sends a blind see
the holding party with the Refer-To target equals to *98
target_number. This feature allows the ATA to hand off a
call to an application server to perform further
processing, such as call park.
The *codes should not conflict with any of the other
vertical service codes internally processed by the ATA.
You can empty the corresponding *code that you do not
want the ATA to process.
4
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa122

Table of Contents