Figure 3-4: The Ad-Hoc Mode Settings Screen; Figure 3-5: The Wireless Security Screen - Cisco Linksys WUSB54GS User Manual

Wireless-G USB Network Adapter with SpeedBooster
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, select the correct operating
channel for your network from the Channel drop-down menu. Then, select the Network Mode from the drop-
down menu. Click the Next button, and go to Step 5. Click the Back button to change any settings.
Channel - The channel you choose should match the channel set on the other devices in your wireless
network. If you are unsure about which channel to use, select the default channel (Channel 6).
Network Mode - Keep the default setting, Mixed, if you have Wireless-G and Wireless-B devices in your
network. Select G-Only if you have only Wireless-G devices in your network.
5. Select the type of security you want to use from the first Wireless Security screen. The choices are Disabled,
WEP, PSK, PSK+RADIUS, or RADIUS. All devices in a network must use the same security method. After
selecting the security method, click the Next button to continue.
Chapter 3: Using the USB Network Adapter's Setup Wizard

Figure 3-4: The Ad-Hoc Mode Settings Screen

Figure 3-5: The Wireless Security Screen

8