Cisco SPA112 Administration Manual page 141

Using the IVR for Administration
Cisco SPA100 Series Phone Adapters Administration Guide
• If the menu is inactive for more than one minute, the IVR times out. You will
need to re-enter the IVR menu by pressing the star key four times: ****. Your
settings take effect after you hang up the telephone or exit the IVR. The ATA
may reboot at this time.
• To enter the decimal points in an IP address, press the * (star) key.
For example, to enter the IP address 191. 1 68. 1 . 1 05, perform the following
tasks:
–Press these keys: 191*168*1*105
–Press the # (pound) key to indicate that you have finished entering the
IP address.
–Press 1 to save the IP address or press the * (star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action
Enter IVR Menu
Check Internet
Addressing Method
Set Internet Addressing
Method
Check Internet IP
Address (INTERNET port)
Set Static IP Address
(INTERNET port)
Check Network Mask
Menu Choices and Instructions
Option
****
100
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
110
111 Enter the IP address by using
numbers on the telephone key pad.
Use the * (star) key when entering a
decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
120
B
141