Connecting The Equipment - Cisco SPA112 Administration Manual

Spa100 series phone adapters
Hide thumbs Also See for SPA112:
Table of Contents

Advertisement

Getting Started with the Cisco SPA100 Series Phone Adapters

Connecting the Equipment

Connecting the Equipment
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA100 Series Phone Adapters Administration Guide
Feature
Description
DC 5V
Connect to a power source, by using the provided power
POWER
adapter.
For wall-mounting instructions, see
Connect one end of the provided Ethernet cable to the INTERNET (Blue) port.
Connect the other end directly to your broadband network device.
Connect one end of the provided phone cable to the PHONE 1 (Gray) port.
Connect the other end to your analog phone or fax machine.
Connect one end of another phone cable to another analog phone or fax machine.
Connect the other end to the PHONE 2 (Gray) port.
SPA122 Only: Optionally, connect one end of an Ethernet network cable to the
ETHERNET (Yellow) port. Connect the other end to a device on your network, such
as a computer or an Ethernet switch.
Connect one end of the provided power adapter to the Power port. Connect the
other end to a power outlet.
Mounting the ATA, page
WAN
1
145.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa122

Table of Contents