Cisco SPA112 Administration Manual page 59

Spa100 series phone adapters
Hide thumbs Also See for SPA112:
Table of Contents

Advertisement

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Resync Error Retry
Delay
Forced Resync
Delay
Resync From SIP
Resync After
Upgrade Attempt
Resync Trigger 1
Resync Trigger 2
Resync Fails On FNF
Description
Resync retry interval (in seconds) applied in case of
resync failure.
The ATA has an error retry timer that activates if the
previous attempt to sync with the provisioning server
fails. The ATA waits to contact the server again until the
timer counts down to zero.
This parameter is the value that is initially loaded into the
error retry timer. If this parameter is set to zero, the ATA
immediately retries to sync with the provisioning server
following a failed attempt. Default setting: 3600 seconds
Maximum delay (in seconds) that the ATA waits before
performing a resync.
The ATA does not resync while one of its lines is active.
Because a resync can take several seconds, it is
desirable to wait until the ATA has been idle for an
extended period before resynchronizing. This allows a
user to make calls in succession without interruption.
The ATA has a timer that begins counting down when all
of its lines become idle. This parameter is the initial
value of the counter. Resync events are delayed until this
counter decrements to zero. Default setting: 14,400
seconds
Enables a resync to be triggered via a SIP NOTIFY
message. Default setting: Yes
Triggers a resync after every firmware upgrade attempt.
Default setting: Yes
Configurable resync trigger conditions. A resync is
triggered when the logic equation in these parameters
evaluates to TRUE. Default setting: (empty)
Determines whether a file-not-found response from the
provisioning server constitutes a successful or a failed
resync. A failed resync activates the error resync timer.
Default setting: Yes
4
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa122

Table of Contents