Cisco SPA112 Administration Manual page 61

Spa100 series phone adapters
Hide thumbs Also See for SPA112:
Table of Contents

Advertisement

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Report Rule
Firmware Upgrade
Upgrade Enable
Upgrade Error Retry
Delay
Downgrade Rev
Limit
Upgrade Rule
Description
The target URL to which configuration reports are sent.
This parameter has the same syntax as the Profile_Rule
parameter, and resolves to a TCP/IP command with an
associated URL.
A configuration report is generated in response to an
authenticated SIP NOTIFY message, with Event: report.
The report is an XML file containing the name and value
of all the device parameters.
This parameter may optionally contain an encryption
key.
For example:
[ --key $K ] tftp://ps.callhome.net/$MA/rep.xml.enc
Default setting: (empty)
Enables firmware upgrade operations independently of
resync actions. Default setting: Yes
The upgrade retry interval (in seconds) applied in case
of upgrade failure. The ATA has a firmware upgrade
error timer that activates after a failed firmware upgrade
attempt. The timer is initialized with the value in this
parameter. The next firmware upgrade attempt occurs
when this timer counts down to zero. Default setting:
3600 seconds.
Enforces a lower limit on the acceptable version number
during a firmware upgrade or downgrade. The ATA does
not complete a firmware upgrade operation unless the
firmware version is greater than or equal to this
parameter. Default setting: (empty)
This parameter is a firmware upgrade script with the
same syntax as Profile_Rule. Defines upgrade
conditions and associated firmware URLs. Default
setting: (empty)
4
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa122

Table of Contents