Cisco SPA112 Administration Manual page 15

Quick Setup for Voice over IP Service
STEP 3
Cisco SPA100 Series Phone Adapters Administration Guide
To verify your progress, perform the following tasks:
a. Click Voice in the menu bar, and then click Info in the navigation tree. Scroll
down to the FXS1 or FXS2 Status section of the page. Verify that the
Registration State is Registered.
If the line is not registered, you may need to refresh the browser several times
because it can take a few seconds for the registration to complete. Also verify
that your Internet Settings, including DNS server settings, are configured
according to the information from your ISP. For more information, see
Settings, page 17.
b. Use an external phone to place an inbound call to the telephone number that
was assigned by your ITSP. Verify that the phone rings and you have two-way
audio on the call.
2
Internet
15