Port Statistics - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual

FC Management MIB
B
connUnitPortStatSCSITable
connUnitPortStatLANTable

Port Statistics

connUnitPortStatTable
connUnitPortStatEntry
E/OS SNMP Support Manual
B-46
SEQUENCE OF ConnUnitPortStatSCSIEntry
Syntax
not-accessible
Access
obsolete
Status
A list of statistics for the SCSI port type.
Description
Sequence
::= { statSet 3 }
SEQUENCE OF ConnUnitPortStatLANEntry
Syntax
not-accessible
Access
obsolete
Status
A list of statistics for the LAN/WAN port type.
Description
Sequence
::= { statSet 4 }
There is one and only one statistics table for each individual port. For
all objects in statistics table, if the object is not supported by the conn
unit then the high order bit is set to 1 with all other bits set to zero.
The high order bit is reserved to indicate if the object if supported or
not. All objects start at a value of zero at hardware initialization and
continue incrementing till end of 63 bits and then wrap to zero.
SEQUENCE OF ConnUnitPortStatEntry
Syntax
not-accessible
Access
mandatory
Status
A list of statistics for the fabric port types.
Description
Sequence
::= { statSet 5 }
ConnUnitPortStatEntry
Syntax