McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 217

Sequence
fcConnUnitPortStatTxElements
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitPortStatRxElements
Syntax
Max-Access
Status
Description
Sequence
fcConnUnitPortStatBBCreditZero
Syntax
Max-Access
Status
Description
Sequence
EOF. FC loop devices should not count frames passed through. This
value represents the sum total for all other Rx objects.
::= { fcConnUnitPortStatEntry 4 }
Counter64
read-only
current
The number of octets or bytes that have been transmitted by this port.
One second periodic polling of the port. This value is saved and
compared with the next polled value to compute net throughput.
Note, for Fibre Channel, ordered sets are not included in the count.
::= { fcConnUnitPortStatEntry 5 }
Counter64
read-only
current
The number of octets or bytes that have been received by this port.
One second periodic polling of the port. This value is saved and
compared with the next polled value to compute net throughput.
Note, for Fibre Channel, ordered sets are not included in the count.
::= { fcConnUnitPortStatEntry 6 }
Counter64
read-only
current
Count of transitions in/out of BBcredit zero state. The other side is
not providing any credit. Note, this is a Fibre Channel stat only.
::= { fcConnUnitPortStatEntry 7 }
Fibre Alliance MIB
A
FA MIB
A-47