McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 60

McDATA SNMP Support
2
ipRouteType
ipRouteProto
E/OS SNMP Support Manual
2-38
INTEGER
Type
RW
Access
The type of route. Note that the values direct(3) and indirect(4) refer
Description
to the notion of direct and indirect routing in the IP architecture.
Setting this object to the value invalid(2) has the effect of invalidating
the corresponding entry in the ipRouteTable object. That is, it
effectively disassociates the destination identified with said entry
from the route identified with said entry. It is an implementation-
specific matter as to whether the agent removes an invalidated entry
from the table. Accordingly, management stations must be prepared
to receive tabular information that corresponds to entries not
currently in use. Proper interpretation of such entries requires
examination of the relevant ipRouteType object.
Values:
other(1),
invalid(2),
direct(3),
indirect(4)
INTEGER
Type
R
Access
The routing mechanism via which this route was learned. Inclusion
Description
of values for gateway routing protocols is not intended to imply that
hosts should support those protocols.
other(1)
local(2)
netmgmt(3) set via a network management protocol
icmp(4)
The remaining values are all gateway routing protocols:
egp(5),
ggp(6),
none of the following
an invalidated route
route to directly connected (sub-)network
route to a non-localhost/network/sub-network
none of the following
-protocol information, e.g., manually configured entries
e.g., obtained via ICMP, Redirect