McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 33

Binding OID
1 1.3.6.1.2.1.8888.1.1.5.1.3.<unit-id>.<sensor-index>
fcConnUnitSensorStatus.<unit-id>.<sensor-index>
Where unit-id is the WWN of the switch with 8 zeros appended for a
total length of 16. Example: 1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0
And where sensor-index refers to the FRU in the sensor table which
has changed state. For example if sensor-index was 5, then you could
th
look at the 5 entry in the sensor table to determine which FRU was
affected.
FA MIB Port Status
Change Trap
Binding OID
1 1.3.6.1.2.1.8888.1.1.6.1.6. <unit-id>.<port-index>
fcConnUnitPortStatus. <unit-id>.<port-index>
Where port-index is the port number normalized to the range 1-140.
2 1.3.6.1.2.1.8888.1.1.6.1.5. <unit-id>.<port-index>
fcConnUnitPortState. <unit-id>.<port-index>
Where port-index is the port number normalized to the range 1-140.
Enterprise-specific
Traps
fcEosPortScn
Type Number
Product Mapping
Trap Variables
Description
fcEosFruScn
Type Number
This trap occurs whenever a port status change occurs. There are 2
variable bindings.
1
Generated when Fibre Channel port operational state changes.
fcEosPortOpStatus
An fcEosPortScn(1) is generated whenever a Fc_Port changes its
operational state. For instance, the Fc_Port goes from online to
offline.
2
McDATA SNMP Support
Value
See description for
fcConnUnitSensorStatus
Value
See definition for fcConnUnitPortStatus.
See definition for fcConnUnitPortState.
E/OS Trap Overview
2
2-11