McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 545

Fw 08.01.00 mcdata e/os snmp support manual (620-000131-630, november 2005)

Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:

Table of Contents

snmpCommunityStatus

The snmpTargetAddrExtTable

snmpTargetAddrExtTable

snmpTargetAddrExtEntry

The status of this conceptual row in the snmpCommunityTable. An

entry in this table is not qualified for activation until instances of all

corresponding columns have been initialized, either through default

values, or through Set operations. The snmpCommunityName and

snmpCommunitySecurityName objects must be explicitly set.

There is no restriction on setting columns in this table when the value

of snmpCommunityStatus is active(1)."

::= { snmpCommunityEntry 8 }

SEQUENCE OF SnmpTargetAddrExtEntry

not-accessible

The table of mask and mms values associated with the

snmpTargetAddrTable. The snmpTargetAddrExtTable augments the

snmpTargetAddrTable with a transport address mask value and a

maximum message size value. The transport address mask allows

entries in the snmpTargetAddrTable to define a set of addresses

instead of just a single address.

The maximum message size value allows the maximum message size

of another SNMP entity to be configured for use in SNMPv1 (and

SNMPv2c) transactions, where the message format does not specify a

maximum message size.

::= { snmpCommunityMIBObjects 2 }

SnmpTargetAddrExtEntry

not-accessible