Table of Contents
Advertisement
Description
Sequence
Port Statistics
connUnitPortStatTable
Syntax
Access
Status
Description
Sequence
connUnitPortStatEntry
Syntax
Access
Status
Description
Sequence
A list of statistics for the LAN/WAN port type.
::= { statSet 4 }
There is one and only one statistics table for each individual port. For
all objects in statistics table, if the object is not supported by the conn
unit then the high order bit is set to 1 with all other bits set to zero.
The high order bit is reserved to indicate if the object if supported or
not. All objects start at a value of zero at hardware initialization and
continue incrementing till end of 63 bits and then wrap to zero.
SEQUENCE OF ConnUnitPortStatEntry
not-accessible
mandatory
A list of statistics for the fabric port types.
::= { statSet 5 }
ConnUnitPortStatEntry
not-accessible
mandatory
An entry describing port statistics.
INDEX { connUnitPortStatUnitId, connUnitPortStatIndex }
::= { connUnitPortStatTable 1 }
ConnUnitPortStatEntry ::=
SEQUENCE {
connUnitPortStatUnitId
FcGlobalId,
connUnitPortStatIndex
INTEGER,
FC Management MIB
Event Group
B-49
B
Advertisement
Table of Contents
