McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 138

McDATA SNMP Support
2
FcConnUnitPortName
Product Mapping
FcConnUnitPortPhysicalNumber
Product Mapping
E/OS SNMP Support Manual
2-116
OfflineConnUnitPort (6): If the addressed connectivity unit allows
this operation to be performed to this port, the addressed port
performs a vendor-specific 'offline' operation. Examples of these
operations are: disabling a port's transceiver, the Link Failure
protocol, request (NON-PARTICIPATING) command to the Loop
Port state machine, or removal of the port from an arbitrated loop by
a hub.
OnlineConnUnitPort (7): If the addressed connectivity unit allows
this operation to be performed to this port, the addressed port
performs a vendor-specific 'online' operation. Examples of these
operations are: enabling a port's transceiver, the Link Failure
protocol, request (PARTICIPATING) command to the Loop Port state
machine, or addition of the port from an arbitrated loop by a hub.
NOTE: Each implementation may chose not to support SNMP Set operations
for any or all of these values. For Sets specifying varbinds for instances of this
object and values not supported by a given implementation, the agent will
return the SNMP WrongValue PDU error code.
SnmpAdminString
Type
Port Name
R/W
Access
A string describing the addressed port.
Description
Unsigned32
Type
Physical port number from 0 to Maximum port number – 1
R
Access
This is the internal port number this port is known by. In many
Description
implementations, this should be the same as fcConnUnitPortIndex.
Some implementations may have an internal port representation not
compatible with the rules for table indexes. In that case, provide the
internal representation of this port in this object. This value may also
be used in the fcConnUnitLinkPortNumberX or
fcConnUnitLinkPortNumberY objects of the fcConnUnitLinkTable.