McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 140

McDATA SNMP Support
2
FcConnUnitPortNodeWwn
Product Mapping
FcConnUnitPortHWState
Product Mapping
E/OS SNMP Support Manual
2-118
F_Port 2 = Fabric(2)
FL_Port 1 = Loop(1)
E_Port 2 = Fabric(2)
H_Port 1 = Loop(1)
B_Port 2 = Fabric(2)
R
Access
Bit mask that specifies the driver level protocol(s) that are currently
Description
operational. If this is not applicable, return all bits set to zero. This
object has the same definition as fcConnUnitPortProtocolCap.
(added from Mib3.0)
FcNameId
Type
switch WWN
R
Access
The Node World Wide Name of the port if applicable, otherwise all
Description
zeros. This should have the same value for a group of related ports.
The container is defined as the largest physical entity. For example,
all ports on HBAs on a host will have the same Node WWN. All ports
on the same storage subsystem will have the same Node WWN.
(added from Mib3.0)
INTEGER
Type
R
Access
The hardware detected state of the port. The values are defined as
Description
follow:
unknown (1)
failed (2)
bypassed (3)
port failed diagnostics
FCAL bypass loop only,