McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 206

Fibre Alliance MIB
A
fcConnUnitREventTime
E/OS SNMP Support Manual
A-36
added by comparing the last known index value with the current
highest index value. The management application should then
update its copy of the event table. If the read interval is too long, it is
possible that there may be events that may not be contained in the
agent's internal event buffer.
For example, an agent may read events 50-75. At the next read
interval, fcConnUnitEventCurrID is 189. If the management app tries
to read event index 76, and the agent's internal buffer is 100 entries
max, event index 76 will no longer be available. The index value is an
incrementing integer starting from one every time there is a table
reset. On table reset, all contents are emptied and all indeces are set
to zero. When an event is added to the table, the event is assigned the
next higher integer value than the last item entered into the table. If
the index value reaches its maximum value, the next item entered
will cause the index value to roll over and start at one again.
Sequence
::= { fcConnUnitEventEntry 1 }
DisplayString (SIZE (15))
Syntax
read-only
Max-Access
current
Status
This is the real time when the event occurred. It has the following
Description
format.
If not applicable, return a NULL string.
Sequence
::= { fcConnUnitEventEntry 2 }
DDMMYYYY HHMMSS
DD=day number
MM=month number
YYYY=year number
HH=hour number
MM=minute number
SS=seconds number