McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 253

Sequence
statusChangeTime
Syntax
Access
Status
Description
Sequence
configurationChangeTime
Syntax
Access
Status
Description
Sequence
connUnitTableChangeTime
Syntax
Access
The following are the defined keywords that will be recognized and
replaced with data during a launch.
USER replace with username
PASSWORD replace with password
GLOBALID replace with globalid
SERIALNO replace with serial number
If write is not supported, then return invalid. This value will be
retained across boots.
DEFVAL { "" }
::= { connSet 2 }
TimeTicks
read-only
obsolete
The sysuptime timestamp in centiseconds at which the last status
change occurred for any members of the set.
::= { connSet 3 }
TimeTicks
read-only
obsolete
The sysuptime timestamp in centiseconds at which the last
configuration change occurred for any members of the set. This
represents a union of change information for
connUnitConfigurationChangeTime.
::= { connSet 4 }
TimeTicks
read-only
FC Management MIB
Connectivity unit group
B
B-5