McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 134

McDATA SNMP Support
2
Product Mapping
FcConnUnitPortState
Product Mapping
FcConnUnitPortStatus
Product Mapping
E/OS SNMP Support Manual
2-112
If the port is Not installed
fcConnUnitPortFCClassOp = 0
else if the Port State is offline
fcConnUnitPortFCClassOp = 0
else it depends on the operating Port Type:
F_Port Use Class of Service specified in Fabric Login
FL_Port Use Class of Service specified in one or more Fabric Login's
(OR'd together)
E_Port 0x58 = classF(0x40) + class2(0x10) + class3(0x08)
R
Access
Bit mask that specifies the classes of service that are currently
Description
operational at this port. If this object is not applicable, the agent
MUST return all bits set to zero.
INTEGER
Type
R
Access
The current state of the port hardware. The bypassed value (4) means
Description
that the port is online but is currently being isolated from the loop or
fabric for some reason; the other values are essentially
self-explanatory. Any value for this object may co-exist with any
value for the fcConnUnitPortStatus object. The values are defined as
unknown (1), online (2), offline (3), bypassed (4).
INTEGER
Type
R
Access
The current overall protocol status for the port. The warning value (4)
Description
means that the port needs attention; the notParticipating value (6)
means that protocol is not being processed; the initializing value (7)
means that the port is in the process of coming into service; the