McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Manual page 301

Fw 08.01.00 mcdata e/os snmp support manual (620-000131-630, november 2005)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

Access
Status
Description
Sequence
connUnitPortStatCountFRJTFrames
Syntax
Access
Status
Description
Sequence
connUnitPortStatCountPRJTFrames
Syntax
Access
Status
Description
Sequence
connUnitPortStatCountClass1RxFrames
Syntax
Access
Status
read-only
mandatory
Count of times that PBSY was returned to this port as a result of a
frame that could not be delivered to the other end of the link. This
occurs if the destination port is temporarily busy. PBSY can only
occur on SOFc1 frames (the frames that establish a connection). Note,
this is a Fibre Channel only stat.This is the sum of all classes. If you
cannot keep the by class counters, then keep the sum counters.
::= { connUnitPortStatEntry 11 }
OCTET STRING (SIZE (8))
read-only
mandatory
Count of times that FRJT was returned to this port as a result of a
Frame that was rejected by the fabric. Note, This is the total for all
classes and is a Fibre Channel only stat.
::= { connUnitPortStatEntry 12 }
OCTET STRING (SIZE (8))
read-only
mandatory
Count of times that FRJT was returned to this port as a result of a
Frame that was rejected at the destination N_Port. Note, This is the
total for all classes and is a Fibre Channel only stat.
::= { connUnitPortStatEntry 13 }
OCTET STRING (SIZE (8))
read-only
mandatory
FC Management MIB
Event Group
B-53
B

Advertisement

Table of Contents
loading

Table of Contents