AC450NX Rack Server System Product Guide
A
Removing the Peripheral Bay Cover
The peripheral bay cover is attached to the chassis with press-in rivets and spring clips. See
Figure 12-2.
1. Observe the precautions on page 115, "Safety Guidelines."
2. Grasp the peripheral bay cover handle and pull.
3. Place the bezel on a smooth surface so that it does not get scratched.
Reinstalling the Peripheral Bay Cover
See Figure 12-2.
1. Position the peripheral bay cover in position and press into place.
120
C
B
Figure 12-1. Server Covers
A.
Memory module cover
B.
Fan array cover
C. Top cover
D. PCI hot-plug cover
D
OM07302