Intel BFCBASE - Motherboard - 7300 Datasheet page 129

Features
7.4.3.3.6 MINV: Minimum Core Voltage
This location contains the minimum Processor Core voltage. This field, rounded to the
next thousandth, is in mV and is reflected in hex. The minimum V
field is the minimum allowable voltage assuming the FMB maximum current draw.
Writes to this register have no effect.
Note: The minimum core voltage value in offset 21 - 22h is a single value that assumes the
FMB maximum current draw. Refer to
voltage specifications based on actual real-time current draw.
Example: A voltage of 1.000 V minimum core voltage would contain 03E8h (1000
decimal) in Offset 21 - 22h.
Offset:
Bit
15:0
7.4.3.3.7 TCASE: T
This location provides the maximum T
temperature in degrees Celsius in hex format. This data can be found in
thermal specifications are specified at the case Integrated Heat Spreader (IHS).Writes
to this register have no effect.
Example: A temperature of 66C would contain 42h (66 decimal) in Offset 23h.
Offset:
Bit
7:0
7.4.3.3.8 PCDCKS: Processor Core Data Checksum
This location provides the checksum of the Processor Core Data Section. Writes to this
register have no effect.
Offset:
Bit
7:0
7.4.3.4 Cache Data
This section contains cache-related data.
Document Number: 318080-002
21h-22h
Minimum Core Voltage
0000h-FFFFh: mV
Maximum
CASE
23h
T Maximum
CASE
00h-FFh: Degrees Celsius
24h
Processor Core Data Checksum
One Byte Checksum of the Processor Core Data Section
00h- FFh: See Section 7.4.4 for calculation of the value
Table 2-10 and Table 2-11
Description
for the processor. The field reflects
CASE
Description
Description
reflected in this
CC
for the minimum core
Section 6. The
129