Prerequisites; Installing The Optional Craft Works Interface - Cisco CRS-1 - Carrier Routing System Router Getting Started Manual

Installing the Optional Craft Works Interface

Prerequisites

The following prerequisites must be met before configuring the Telnet, HTTP, and XML host services:
•
•
See
activating packages.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
Examples
In the following example, the host services are enabled:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# telnet ipv4 server enable
RP/0/RP0/CPU0:router(config)# telnet ipv6 server enable
RP/0/RP0/CPU0:router(config)# http server
RP/0/RP0/CPU0:router(config)# xml agent corba
RP/0/RP0/CPU0:router(config)# commit
Related Documents
Related Topic
Install and activate the Manageability and Security
Packages
Descriptions of the HTTP and XML server commands Manageability Commands on Cisco IOS XR Software
Descriptions of the Telnet commands
Installing the Optional Craft Works Interface
The CWI for the Cisco IOS XR is a client-side GUI used to configure and manage Cisco CRS-1 routers.
The CWI provides an interface that uses a Windows-type look and feel. The CWI is included with the
Cisco IOS XR Manageability package.
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
5-8
For the XML and HTTP host services, the Manageability package must be installed and activated
on the router.
To enable the Secure Socket Layer (SSL) of the HTTP and XML services, the Security package must
be installed and activated on the router.
Chapter 6, "Managing Cisco IOS XR Software Packages,"
configure
telnet ipv4 server enable
telnet ipv6 server enable
http server
xml agent corba
commit
Chapter 5
Document Title
Chapter 6, "Managing Cisco IOS XR Software Packages"
Host Services and Applications Commands on Cisco IOS XR
Software
Initial Configuration of the Cisco IOS XR Software
for information on installing and