Checking Central Tube - Porsche 928 Workshop Manual

928
Differential/Transaxle System
39
Checking Central Tube
Note:
3. Small corrections can be made by
tapping face of central shaft with plastic
hammer. Replace entire central tube with shaft and
bearings, if bearings and/or shaft are damaged.
There are no replacement parts available,
1. Check easy movement of central shaft
bearings by turning shaft by hand. Shaft
must turn easily and without restriction at
any point.
2. Position of central shaft and rear flange
shaft is important to guarantee proper
function.
Distance between central shaft and rear
flange must be A = 2 * 0.5 mm.
Printed in Germany VI
I I, 1984
Checking Central Tube
39 139