Porsche 928 Workshop Manual page 202

928 DifferentiaI/Transaxle System
39
Changes on Drive Pinions/Ring Gears
In the near future there will be drive pinions/ring gears with the following adjusting
information.
R, =
Design distance 74.70 mm
E = Adjusting distance
r = Deviation
1 = Adjusting distance (R, + r), e. g. 75.05 mm
2 = Pair number (three digits: 001 999)
3 = Backlash
Note:
The missing 5 mm thick gauge plate VW 385/17 must also be considered for adjustments
with these drive pinions/ring gears.
Example:
Recorded on ring gear - zdjustimj dZttiii& E = 75.05
Adjusting distance E 75.05 mm
Missing gauge plate + 5.00 mm
Adjustment of adjusting gauge
80.05 mm
Printed in Germany VIII, 1984
Adjusting Drive Pinion and Ring Gear
39- 129