Porsche 928 Workshop Manual page 29

37
Automatic Transmission/Controls, Case
928
5.Carefully lift out guide.
6.Detach control cable from actuat-
ing rod and pull out toward rear.
Installing:
l.Carefully feed control cable
through sleeve from rear.
2.Install clamp correctly and
attach spherical head with hex
nut.
A = Clamp
3.Attach Bowden cable to transmission
4.Adjust cable for control pressure
(see page 37 - 115).
37 - 114 Bowden Cable for Control Pressure,
Printed in Germany
Removing and Installing (Service Solution)