Porsche 928 Workshop Manual page 145

38
Automatic Transmission/Gears, Control
928
NOTES FOR REMOVING AND INSTALLING
Removi
nq
Note:
It is not necessary to disassemble
the transmission to remove or
install the primary
pump.
l.Remove transmission.
Z.Remove front converter casing and
converter.
3.Unscrew mounting bolts for front
transmission cover.
4.Screw two bolts in
threaded
holes
and pull bolts to withdraw cover.
5.Press spring plate down and
remove circlip.
6.Unscrew mounting bolts and remove
pump; screw two bolts in threaded
holes and carefully drive out
primary pump with light taps of a
nylon-headed hammer.
Installing
l.Check bearing sleeve for grooves
or signs of damage. If damage is
discovered, the primary pump must
be replaced.
38 - 152 Removing and Installing
Primary Pump
Printed in Germany