Porsche 928 Workshop Manual page 18

928
Clutch, Automatic Torque Converter
32
l.Rinse torque converter with
Special Tool 9310. To rinse, fill
converter with approx. 11 of
kerosine, insert the rinsing pin
and use a hand drill to turn the
pin at low speed. Then drain
kerosine off through drain plug.
Repeat rinsing 2 - 4 times until
the kerosine drained from the
converter is clean.
2.Attach Special Tool 9301 to
torque converter.
3.Coat drive flange and bearing
pin of converter with MoS2
multi-purpose grease.
4.Place transmission upright and
carefully insert converter,
turning unit in both directions
to engage the teeth.
5.Check installation depth of
converter.
Up to '86 models = approx. 16 mm
'87 models onward = approx. 28 mm
Printed in Germany - XVI,1987
Removing and Installing
32 - 105
Torque Converter