Porsche 928 Workshop Manual page 196

39
Differential/Transaxle System
928
DISASSEMBLING AND ASSEMBLING BEARING ASSEMBLY
Disassembling
1. Press out pinion with a piece of suitable
pipe.
-. -
i_
2. Press off tapered roller bearing inner race
with a special tool (e. g. Kukko, size 2).
fz,- -.- '
I- 'F-7 2
/ ,--- >-~. _
Assembling
Note:
Bearing flange is only available as a complete
unit (with tapered roller bearings and
adjusting ring) for replacements.
1. Heat tapered roller bearing inner races to
approx. 120 "C/250 OF and install.
2. Press on assembled bearing with a piece of
suitable pipe (approx. 5 tons force).
5
"-23
.
39-122 Disassembling and Assembling Bearing Assembly
Printed in Germany