Porsche 928 Workshop Manual page 160

928 Automatic Transmission/Gears, Valve Body
38
3. Place outer race of one-way clutch on inner
plate carrier and install roller cage in
correct oosition.
4. Push cylindrical rollers against springs and
apply Special Tool 9322 with bend facing
out.
5. Install one-way clutch inner race while
turning in direction of arrow.
6. Remove Special Tool 9322.
7. Install shim.
Note:
Install O-ring only after checking axial play
of one-way clutch.
Printed in Germany - VI I I, 1984
Disassembling and Assembling One-way Clutch
38-167