Porsche 928 Workshop Manual page 69

928 Automatic Transmission/Controls, Case 37
8.Recheck to ensure that teflon
rings are correctly seated on
support flange.
ll.Push clutch K 2 onto gearset.
9.Press brake band B 2 as close
together as possible at the
support lugs and insert right way
round in case.
lO.Place greased split radial
bearing on output shaft.
lZ.Carefully place gearset without
clutch K 1 in transmission case
while turning input shaft.
13.Set transmission upright with
input shaft at top.
---a--
Printed in Germany - XVI,1987 Disassembling and Assembling
37 - 155
Transmission