Porsche 928 Workshop Manual page 70

37 Automatic Transmission/Controls, Case
928
14.Check installation position of
gearset. The gearset position is
correct when the upper edge of
the connector element (arrowed)
is lower than the contact
surface of the outer plate LB 3.
16.Insert plates for plate brake
8 3 right way round.
v-
--. -----IT. I ~---
15.As of transmission No. 379225,
install damping spring,
A - Damping spring
l=
2=
3=
4=
5=
Inner plate 2.1 mm thick
Outer plate 7.7 mm thick
Outer plate 2.3 or 2.8 mm
thick*
Outer plate 2.8 mm thick
Shim 2.5-3.0-3.5 mm thick*
* as required to correct play
17.Measure play "L" of B 3 and
correct.
Measure distance "d":
Place measuring bridge 9313 on
prepared face and measure with
depth gage to shim.
37 - 156 Disassembling and Assembling Transmission Printed in Germany