Porsche 928 Workshop Manual page 74

37 Automatic Transmission/Controls, Case 928
Select axial bearing, rotation
washer and shims such that the
overall thickness is 3.8 mm.
28.With a blob of grease, attach
spacer to support and place
front cover with seal in
position. Tighten mounting
bolts. Tightening torque: 13 NM
(10 ftlb).
Insert these spacers as calculated
(thickness in example, 3.8 mm)
A - Centering pins 9321
1 = Axial bearing
2 = Rotation washer
3 = Shim
29.Turn assembly support so that
output shaft is facing upward.
27.Check that teflon rings in front
cover and on input shaft are
correctly seated.
a
a
37 - 160 Disassembling and Assembling Transmission Printed in Germany