Porsche 928 Workshop Manual page 64

37 Automatic Transmission/Controls, Case 928
31.Withdraw cover.
32.Withdraw centrifugal-force
controller after swinging back
axial holder.
35.A modified controller drive gear
was fitted as of approx.
December 1986. With this design,
remove spacer.
/
A = Spacer
8 = Circlip
33.Remove axial holder.
34.Remove helical gear with shims.
Note thickness of shims for
reinstallation.
36.With a suitable pair of pliers
(e.g Hazet 1847 - 2) disengage
circlip from input shaft.
a
37 - 150 Disassembling and Assembling Transmission
Printed in Germany