McDATA StorageWorks 64 - SAN Director Switch Manual page 475

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

fcFxPortFcphVersionAgreed

fcFxPortNxPortBbCredit

fcFxPortNxPortRxDataFieldSize

The object identifies the associated NxPort in the attachment for

which the entry contains information.

::= { fcFxlogiEntry 3 }

The version of FC-PH that the FxPort has agreed to support from the

Fabric Login

::= { fcFxlogiEntry 4 }

The total number of buffers available for holding Class 1

connect-request, Class 2 or Class 3 frames to be transmitted to the

attached NxPort. It is for buffer- to-buffer flow control in the

direction from FxPort to NxPort. The buffer-to-buffer flow control

mechanism is indicated in the respective fcFxPortBbCreditModel.

[1](23.6.2.2)

::= { fcFxlogiEntry 5 }

FcRxDataFieldSize

The Receive Data Field Size of the attached NxPort. This is a binary

value that specifies the largest Data Field Size for an FT_1 frame that

can be received by the NxPort. The value is in number of bytes and

ranges from 128 to 2112 inclusive.

::= { fcFxlogiEntry 6 }

Fabric Element Management MIB