McDATA StorageWorks 64 - SAN Director Switch Manual page 320

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

FC Management MIB

READ: Indicates that this row does exist, but that traps are not

enabled to be sent to the target.

WRITE: If the row does not exist, and the agent allows writes to the

trap table, then a new row is created. The values of the optional

columns will be set to default values. Traps are not enabled to be sent

to the target. If the row already existed, then traps are disabled from

being sent to the target.

READ: Indicates that this row exists, and that traps are enabled to be

sent to the target.

WRITE: If the row does not exist, and the agent allows writes to the

trap table, then a new row is created. The values of the optional

columns will be set to default values. Traps are enabled to be sent to

the target. If the row already exists, then traps are enabled to be sent

to the target.

A value of rowActive or rowInactive must be specified to create a

row in the table.

::= { trapRegEntry 4}

E/OS SNMP Support Manual