McDATA StorageWorks 64 - SAN Director Switch Manual page 420

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

ipRouteMetric5

E/OS SNMP Support Manual

constructs the value of the ipRouteMask by determining whether the

value of the correspondent ipRouteDest field belong to a class-A, B,

or C network, and then using one of:

255.255.255.0

If the value of the ipRouteDest is 0.0.0.0 (a default route), then the

mask value is also 0.0.0.0. It should be noted that all IP routing

subsystems implicitly use this mechanism.

::= { ipRouteEntry 11 }

An alternate routing metric for this route. The semantics of this

metric are determined by the routing-protocol specified in the route's

ipRouteProto value. If this metric is not used, its value should be set

::= { ipRouteEntry 12 }

OBJECT IDENTIFIER

A reference to MIB definitions specific to the particular routing

protocol which is responsible for this route, as determined by the

value specified in the route's ipRouteProto value. If this information

is not present, its value should be set to the OBJECT IDENTIFIER { 0 0

}, which is a syntatically valid object identifier, and any conformant

implementation of ASN.1 and BER must be able to generate and

recognize this value.

::= { ipRouteEntry 13 }