Table of Contents
Advertisement
Fibre Alliance MIB
A
fcConnUnitContact
fcConnUnitLocation
E/OS SNMP Support Manual
A-16
resetConnUnitWarmStart: the addressed unit performs a
offlineConnUnit:
onlineConnUnit:
NOTE: Each implementation may chose not to support SNMP Set
operations for any or all of these values. For Sets specifying varbinds
for instances of this object and values not supported by a given
implementation, the agent will return the SNMP WrongValue PDU
error code.
Sequence
::= { fcConnUnitEntry 19 }
Syntax
SnmpAdminString
Max-Access
read-write
Status
current
Description
Contact information for this connectivity unit. The contact
information is intended to facilitate contacting someone in case of
problems, questions, etc. (e.g., the a help desk internal to a company).
Sequence
::= { fcConnUnitEntry 20 }
Syntax
SnmpAdminString
Max-Access
read-write
Status
current
Description
Location information for this connectivity unit.
Sequence
::= { fcConnUnitEntry 21 }
'WarmStart' reset.
the addressed unit puts itself into an
implementation dependant 'offline' state.
In general,if a unit is in an offline state, it
cannot be used to perform meaningful
Fibre Channel work.
the addressed unit puts itself into
animplementation dependant 'online'
state. In general, if a unit is in an online
state, it is capable of performing
meaningful Fibre Channel work.
Advertisement
Table of Contents
