Table of Contents
Advertisement
FcConnUnitPortProtocolCap
Type
Product Mapping
Access
Description
FcConnUnitPortProtocolOp
Type
(added from Mib3.0)
OCTET STRING (SIZE (2))
If the port is Not installed
fcConnUnitPortProtocolCap = 0
else if ES-1000
H_Port 1 = Loop(1)
B_Port 2 = Fabric(2)
else it depends on the configured Port Type:
Gx_Port 3 = Loop(1) + Fabric(2)
G_Port 2 = Fabric(2)
Fx_Port 3 = Loop(1) + Fabric(2)
F_Port 2 = Fabric(2)
E_Port 2 = Fabric(2)
R
Bit mask that specifies the driver level protocol capability of this port.
If this is not applicable, return all bits set to zero.
The bits have the following definition: unknown – 0, Loop – 1, Fabric
– 2,
SCSI – 4, TCP/IP - 8, VI – 16, FICON – 32.
(added from Mib3.0)
OCTET STRING (SIZE (2))
Product Mapping
If the port is Not installed
fcConnUnitPortProtocolOp = 0
else if the Port State is offline
fcConnUnitPortProtocolOp = 0
else it depends on the operating Port Type:
McDATA SNMP Support
Fibre Alliance MIB
2-117
2
Advertisement
Table of Contents
