McDATA StorageWorks 64 - SAN Director Switch Manual page 192

Fibre Alliance MIB
A
fcConnUnitPortFCClassCap
fcConnUnitPortFCClassOp
E/OS SNMP Support Manual
A-26
Description
The port type refers to the protocol active on the port and can take
one of the following values:
unknown (1)
other (2)
notPresent (3)
hubPort (4)
nPort (5)
lPort (6)
flPort (7)
fPort (8)
ePort (9)
gPort (10)
domainController (11)
hubController (12)
scsi (13)
escon (14)
lan (15)
wan (16)
Sequence
::= { fcConnUnitPortEntry 2 }
Syntax
FcPortFCClass
Max-Access
read-only
Status
current
Description
Bit mask that specifies the classes of service capability of this port. If
this object is not applicable, the agent MUST return all bits set to zero.
Sequence
::= { fcConnUnitPortEntry 3 }
Syntax
FcPortFCClass
Max-Access
read-only
Status
current
cannot be determined
none of the following:
no port
hub port
end port for fabric
end port for loop
public loop
fabric port
fabric expansion port
generic fabric port
domain controller
hub controller
parallel SCSI port
escon port
LAN port
WAN port"